FAQ: Give'r Expedition Split Mittens
For the most up-to-date information about the status of our project, check our project updates on Kickstarter!

How do I add the customized hand-branded initials to my pledge?

To receive hand-branded initials on your Split Mittens, select the add-on for Hand-Branded Initials for each pair in your reward tier. This is available for $8 per pair. In the survey, you will provide the initials you want branded (up to three characters) for each pair.

Last updated: November 05, 2025 12:04

Is there a limit to characters / letters to have branded on the mittens?

Yes, you will be able to choose up to 3 letters or characters for hand-branding on your mittens. The characters / letters you choose in the survey after the campaign ends will be branded on both the left and the right mittens.

Last updated: November 05, 2025 12:05

I want to get a pair of Frontier Mittens as a gift, how do I determine their size?

In addition to the sizing details found on the campaign page, please reference the Gifting Sizing Guide to assist in selecting your mitten sizes for lucky gift recipients!

Last updated: November 05, 2025 12:06

Are the mittens unisex in fit?

Yes, our mittens are unisex in design and fit, available in sizes from X-Small to 3X-Large. We worked with over 100 male and female testers in the last year to dial in the fit and sizes to ensure you’re good to go! The sizing chart and guidelines are provided to determine your mitten size selection.

Last updated: November 05, 2025 12:07

I already own a pair of Give'r Gloves or Mittens, should I get the same size for the Expedition Split Mittens?

We have put in a lot of work to refine and hone-in our product sizing, consistency and guidance over the years. Our most up to date sizing chart, as seen on the campaign page and in this survey, is the simplest and best guide to determine your size. While it is highly probable you will fall under the same size as prior campaigns/other Give’r Gloves or Mittens, it is best to reference the sizing charts supplied in this survey to select your Split Mitten Size!

Last updated: November 05, 2025 12:11

Can you tell me where are these mittens sourced / manufactured?

Our gloves and mittens are made with materials sourced from Europe, Asia, India, and the U.S., with most leather tanning and layer stitching managed by our socially and ethically responsible manufacturing partners based in Shenzhen, China. We work closely with experienced Chinese and US based partners (who have been in the leather and glove trade for decades), ensuring high-quality, ethical, and sustainable practices throughout. Each glove is designed, tested, waxed, baked, and hand-branded with initials here in good ol’ Jackson, Wyoming.

Last updated: November 05, 2025 12:12

Adding additional items?

Additional Pair of Expedition Split Mittens may be available to you at special Kickstarter discounts! Because of the tight timeline associated with our fulfillment goals, the exact offerings via Backerkit will vary depending on your country of residence. Please visit our website (www.give-r.com) to shop the full Give’r product line and order right away! Note: we cannot combine any website orders with Split Mitten reward shipments.

Last updated: November 05, 2025 12:18

Shipping Domestic: Do I have to pay sales tax and shipping fees?

Shipping fees are collected upon backing the campaign in Kickstarter. We have done our very best to project the real domestic shipping costs and in most all cases, provide the stated fees at a discounted rate to you.

We are obligated to register, collect, and remit sales tax in certain USA states where backers are located. Taxes were NOT included in the pledge price, but are calculated & charged based on backers’ shipping address that is provided as part of this fulfillment survey.

We would certainly prefer to collect tax up-front during the Kickstarter Campaign, like every other online sale, but the Kickstarter platform does not have that tax functionality. Through the use of Backerkit, this third party fulfillment platform, we are able to calculate/charge taxes based on your total order amount and shipping location all at once, aiming for the smoothest processing possible.

Last updated: November 05, 2025 12:22

Do I need to do anything to receive wax coating on my Expedition Split Mittens?

While this has been available as an add-on option for past campaigns (for $10 cost), this tender love and care wax coating is included with your Split Mitten rewards at no additional cost! Each pair of Expedition Split Mittens will receive our famous “bomb-proofing” treatment, consisting of multiple rounds of oven-baking and hand-waxing. This process seals the leather and canvas with natural beeswax for unmatched protection, weatherproofing, and conditioning, so you will be ready to give’r right away!

Last updated: November 05, 2025 12:24

What cleaning and care is needed for the Mittens?

Detailed information on Expedition Split Mitten care will be included with each pair of Frontier Mittens when rewards are sent out! We will continue to update our website with care guidance and FAQs here: https://www.give-r.com/products/expedition-split-mittens

=> These are some general guidelines for how to best clean and care for your mittens to ensure a lifetime of given’r! Cleaning - To clean the mittens, use a damp cloth or Give’r Wax Packet to wipe away dirt from surface of mittens. Do not submerge in water or use soap. - Do not try to turn mittens inside out, as the insulation and membrane layers are specially attached to outer leather and if damaged, can be difficult to put back into place. - We do not advise you to saturate the Expedition Split Mittens with water. If they do become saturated, do not twist, but gradually squeeze the water out and proceed with drying at room temperature. You can use a fan or space heater for increased rate of drying. Care - If looking to add protection to the leather exterior on your own, we recommend a natural wax coating, or non-silicone based, leather treatment. Give’r Wax Packets are available for purchase on our website. - The wax coating helps to retain natural moisture content and preserve the integrity of the premium leather. Additionally, the coating will prevent dirt or dust from getting into the leather pores. - If any moisture build up occurs inside the mittens, it is best to dry out at room temperature. For best results, place mittens on their side, leaning against each other, with the bottom cuff opening as wide as possible, to ensure maximum air flow in and out of mitten. - Sun exposure, a fan or a heated fan can be used to expedite the drying process. - You can also utilize any accessible products that absorb moisture or allow for extra air flow (i.e. boot dryer, shoe dehydrator, newspaper etc.). - Avoid use of tumble-driers, high temperature ovens or any method involving heat over 180 degrees F

Last updated: November 05, 2025 12:35

Shipping: Can I pick up my rewards directly from Give’r HQ?

We unfortunately cannot arrange for an office pickup as our fulfillment procedure and timing goals do not allow for manual pick-ups or deliveries in Jackson Hole. Know that we’re priming the pump to ensure all rewards are processed and shipped with the best organization and systems structure we’re capable of executing.

Last updated: November 05, 2025 12:36

Shipping: Can I split my shipment?

Because of the tight timeline associated with our fulfillment goals and the need to automate as much of the process as we can, we aren’t able to arrange for split shipments of rewards. We hope you can understand and thank you for your support – you’re going to LOVE how they fit and feel!

Last updated: November 05, 2025 12:36

Do my add-on mittens come with wrist leashes?

Yes! Each and every pair of Expedition Split Mittens, for every reward tier, will come with a pair of Give’r Wrist Leashes!

Last updated: November 05, 2025 12:38

How do I get another pair of wrist leashes?

All Split Mittens will come with their own pair of wrist leashes. So a 2-pack gets 2 pairs of leashes, a 4-pack gets 4 pairs of leashes and so on. Additional wrist leashes are available through our website: www.give-r.com!

Last updated: November 05, 2025 12:40

International Shipping: Which carrier will be used? Taxes and Fees?

For international backers, the shipping fee collected when you backed this project covers packaging and courier costs to deliver your Split Mittens from our HQ in Jackson Hole, Wyoming. These international shipping fees are the most accurate and reasonable rates we could negotiate, using either UPS Worldwide or Fedex International, and are often provided to you at a discount.

As creators and as a business, we have an obligation to register, collect, and remit sales tax in certain countries worldwide where backers are located. Taxes were NOT included in the pledge price but are calculated & charged based on backers’ shipping address and are collected in this Post Campaign Fulfillment Survey.

We would certainly prefer to collect tax up-front, like every other online sale, but the Kickstarter platform does not have tax functionality. Through the use of Backerkit, this 3rd party fulfillment software, we are able to calculate/charge taxes based on your total order amount and shipping country/location in one step - aiming for the easiest processing and most efficient receiving of your rewards.

Note that we cannot adjust the value of your rewards on customs declaration documentation - the value will be declared as the total value in USD of the item(s) contained in the shipment.

Last updated: November 05, 2025 12:46

My Order Confirmation Shows only 1 Wrist Leash?!?

Rest assured, the Wrist Leash listing of “1” in your order confirmation is a binary indicator to us…meaning since you answered YES to the “Wrist Leash” Question in your survey, we have ensured that all Expedition Split Mittens in your order will have their own set of Wrist Leashes!

Last updated: December 16, 2025 11:46

Shipping Updates
For the most up-to-date information about the status of our project, check our project updates on Kickstarter!
No shipping updates are provided.
BackerKit FAQ

What is BackerKit?

BackerKit is a service that crowdfunded project creators use to keep track of hundreds to tens of thousands of backers—from shipping details, pledge levels, preferences and quantities, whether they have paid or had their card declined, special notes, and everything in between!

The BackerKit software and support team is independent from the campaign’s project team—BackerKit does not handle the actual reward shipping. For more information about the preparation or delivery status of your rewards, please check the project's updates page.

How does BackerKit work?

After the campaign ends, the project creator will send you an email with a unique link to your survey. You can check out a walkthrough of the process here.

I never received my invitation. How do I complete the survey?

The most common reasons for not receiving a survey email is that you may be checking an email inbox different from the email address you used to sign up with Kickstarter, Indiegogo or Tilt Pro account, or it may be caught in your spam filter.

Confirm that the email address you are searching matches the email address tied to your Kickstarter, Indiegogo, or Tilt Pro account. If that doesn’t work, then try checking your spam, junk or promotions folders. You can also search for "backerkit” in your inbox.

To resend the survey to yourself, visit the project page and input the email address associated with your Kickstarter, Indiegogo or Tilt Pro account.

How do I update my shipping address?

BackerKit allows you to update your shipping address until the shipping addresses are locked by the project creator. To update your address, go back to your BackerKit survey by inputting your email here.

When will my order be shipped, charged or locked?

That is handled directly by the project creator. BackerKit functions independently of the project itself, so we do not have control of their physical shipping timeline. If you want to check on the project’s status, we recommend reading over the project's updates page.

I completed the survey, but haven't received my rewards yet. When will they arrive?

As BackerKit does not actually handle any rewards or shipping, the best way to stay updated on the shipping timeline would be to check out the project's updates page.

Terms and Conditions

Contact Us